
High Specific Speed Turgo Water Turbine with Stainless Steel Runner
Water Head: | 70m - 300m | Generator Output Voltage: | 400V, 6.3KV, Or 10.5KV AC |
Capacity: | 100KW-2000kw | Frequency: | 50/60HZ |
Type: | Horizontal / Vertical Pelton Turbine | Runner Material: | Stainless Steel (0Cr13Ni4Mo) |
Descrition:
The Turgo turbine is an impulse water turbine designed for medium head applications, from 50m-300m, between Francis turbine and Pelton Turbine.
The feature is an angle of 22.5°is formed between the center line of the nozzle jet and the rotational plane of the runner. The water from the penstock is transformed into a high speed jet through the nozzle. The water is directed obliquely to one side of the runner and discharges at the other. The dynamic force of water flow makes the runner rotate rapidly.
A Turgo runner looks like a Pelton runner split in half. For the same power, the Turgo runner is one half the diameter of the Pelton runner, and so twice the specific speed. The Turgo can handle a greater water flow than the Pelton because exiting water doesn't interfere with adjacent buckets.
The specific speed of Turgo runners is between the Francis and Pelton. Single or multiple nozzles can be used. Increasing the number of jets increases the specific speed of the runner by the square root of the number of jets (four jets yield twice the specific speed of one jet on the same turbine ).
Turgo turbine is characterized not only by high specific speed , high flow and even efficiency curve, but also by simple construction, easy erection test and adjustment , reliable operation, simple maintenance and low cost.
Applications:
1. Water head: 50m - 250m
2. Capacity: 100kw - 2000KW
3. Runner diameter: below1.5m.
4. Frequency: 50/ 60hz
5. Generator Output Type: 0.4KV, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interested in the Turgo turbine, you should send some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry.
Specifications:
Type | Horizontal Turgo turbine with one /two nozzles |
Water head | From 50m to 250m. |
Installation capacity | From 100KW to 2000KW |
Runner material | Stainless steel (0Cr13Ni4Mo) |
Generator type | Synchro generator |
Auxiliary Equipment | Governor, Inlet Valve, unit side panel, excitation system |
Water head range For Turgo Turbine
Competitive Advantage:
HYDROTU is the complete Chinese hydropower equipment supply,
consulting and engineering design venture in the field of
hydropower equipment. We provide the high quality Chinese
hydropower equipment with advanced technologies and integrated
services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with
customized support from project planning through implementation to
plant commissioning and service. Our principle: Customer’s project is our project , customer’s success is our
success.
HYDROTU covers the services, complete equipment supply, economic
solution of the global hydropower projects and aims to be the best
global supplier of hydropower equipment as well as the best
integrated services provider on the hydropower markets.
HYDROTU achieved ISO9001 quality system certification, has perfect quality management and process control system. Focus on building own brand, efforts to build brand of international competitive products. Hydrotu is always committed to research and development of new products, new technology, improve manufacturing capacity, and perfect the quality management system and service system.
Our goals is " Fine manufacturing, pursue quality products, supply the best quality hydropower equipment".
Hangzhou Hydrotu Engineering Co.,Ltd.
HYDROTU are the complete Chinese hydropower equipment provider, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.
Hangzhou HydroTu Engineering Co. Ltd covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be one of the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.
1. Already Running Hydrotu's hydropower Project Partial 1.pdf
2. Already Running Hydrotu's Hydropower project Partial 2.pdf
3. Already Running Hydrotu's Hydropower project Partial 3.pdf
please visit our another website to download:
https://www.hydropower.com.cn/photosdrawings.asp
Main Reference List of Hydropower Project worldwide By Hydrotu
(V-vertical; H-Horizontal; D1-diameter; Hr- water head; Qr- rated flow; n-Speed)
Country | Project Name | Turbine Type | Project parameter | Operation Year | Supplier |
Turkey | KOZAK 2x2200KW | V-Kaplan D1=130cm | Hr=23.0m, Qr=11m3/s, n=500rpm | 2007 | Hydrotu |
Turkey | TAYFUN 2x500KW | H-Francis D1=53cm | Hr=55.0m, Qr=1.05m3/s n=1000rpm | 2007 | Hydrotu |
Turkey | GUNESLI 1200KW+600KW | H=Francis D1=60cm+53cm | Hr=65.0cm, Qr=2.2+1.1m3/s n=1000rpm | 2007 | Hydrotu |
Canada | KLEMTU 1x1800KW | H-Pelton D1=82cm | Hr=310m,Qr=0.66m3/s n=900rpm | 2007 | Hydrotu |
Turkey | GEMKOPRU 2x820KW | H-Francis D1=61cm | Hr=87.0m, Qr=1.12m3/s, n=1000rpm | 2008 | Hydrotu |
Turkey | UCKAYA 800KW+320KW | H-Francis &H-Turgo | Hr=107.6,Qr=0.8+0.36m3/s n=1000rpm | 2008 | Hydrotu |
Turkey | KOYABASI 750KW+320KW | H-Francis D1=60+50cm | Hr=80.0cm,Qr=1.13+0.487m3/s n=1000rpm | 2008.1 | Hydrotu |
Turkey | EGE-1 2X460KW | H-Francis D1=65cm | Hr=21.7m,Qr=2.52m3/s, n=600rpm | 2008.3 | Hydrotu |
Turkey | YILDIZLI 2X600KW | H-Francis D1=51cm | Hr=44.0cm,Qr=1.65m3/s, n=1000rpm | 2008.3 | Hydrotu |
Turkey | KAHRAMAN 2x750KW | H=Turgo D1=60cm | Hr=187.2m,Qr=0.503m3/s n=1000rpm | 2008.4 | Hydrotu |
Turkey | TIMARLI 3x2400KW | V-Kaplan D1=225cm | Hr=10.5m,Qr=26.67m3/s, n=750rpm | 2008.10 | Hydrotu |
Serbia | GORNE GARE 2X1100KW | H-Francis D1=56cm | Hr=63.5m,Qr=2.05m3/s, n=1000rpm | 2008.10 | Hydrotu |
Serbai | TEGOSNICA 410KW+250KW | V-Propeller D1=74cm | Hr=15.9m,Qr=3.1+1.9m3/s n=750rpm | 2008.10 | Hydrotu |
Serbia | LIVADE 1x450KW | H-Turgo D1=60cm | Hr=257.0m,Qr=0.21m3/s, n=1000rpm | 2008.10 | Hydrotu |
Turkey | GOK 3x3500KW | V-Propeller D1=160cm | Hr=28.7m,Qr=14.0m3/s, n=428.6rpm | 2009.6 | Hydrotu |
Turkey | Poyraz 2x1650KW | H-Francis D1=60cm | Hr=76.0m,Qr=2.535m3/s n=1000rpm | 2009.6 | Hydrotu |
Turkey | Kozan 2x1980KW | H-Francis D1=76cm | Hr=57.24m,Qr=4.0m3/s, n=750rpm | 2009.6 | Hydrotu |
Bosinia | Kuslat 2x600KW | V-Kaplan D1=140cm | Hr=8.0m,Qr=2x8.85m3/s, n=300rpm | 2009.7 | Hydrotu |
Turkey | KORUKOY HES 1x3000KW | H-Pelton D1=95cm | Hr=320m, Qr=1.1m3/s, n=750rpm | 2009.11 | Hydrotu |
Turkey | EGE-3 2x630KW | H-Francis D1=76cm | Hr=21.409m,Qr=2x3.35m3/s, n=500rpm | 2010.1 | Hydrotu |
Turkey | EGE-4 2X940KW | H=Francis D1=68cm | Hr=32.354m,Qr=2x3.6m3/s, n=500rpm | 2010.1 | Hydrotu |
Turkey | BIZNA 3X8500KW | V-Francis D1=145cm | Hr=56.5m,Qr=3x16.957m3/s n=428.6rpm | 2010.7 | Hydrotu |
Turkey | Bingol 2x3200KW+2x600KW | H-Francis D1=92.5+52cm | Hr=55.31m,Qr=2x6.7m3/s+2x 1.3m3/s,n=600+1000rpm | 2010.3 | Hydrotu |
Turkey | Tugra-1 2x2800KW | H-Pelton D1=82cm | Hr=411.728m,Qr=2x0.75m3/s n=1000rpm | 2010.5 | Hydrotu |
Turkey | EGER 2X960KW | H-Francis D1=84cm | Hr=24.62m,Qr=2x4.5m3/s n=500rpm | 2010.8 | Hydrotu |
Turkey | TONYA 2x1320KW | H-Pelton D1=90cm | Hr=182m,Qr=2x0.862m3/s n=600rpm | 2010.9 | Hydrotu |
Turkey | DEREBASI 2x5300KW | H-Pelton D1=140cm | Hr=425.6m,Qr=2x1.5m3/s n=600rpm | 2011.2 | Hydrotu |
Turkey | KILINCLI-1 2x970KW | H-Francis D1=82cm | Hr=26.8m,Qr=2x4.2m3/s, n=500rpm | 2011.2 | Hydrotu |
Turkey | MINI 50KW | V-Propeller D1=25cm | Hr=20m,Qr=0.35m3/s n=1000rpm | 2011.3 | Hydrotu |
Serbia | DONJE GARE 2x1000KW+500KW | H-Francis D1=59.5+52.5cm | Hr=77.7m,Qr=2x1.627m3/s+0.796 m3/s,n=1000rpm | 2011.4 | Hydrotu |
Serbia | KALIDRA 700KW | H-Turgo D1=60cm | Hr=204.5m,Qr=0.43m3/s n=1000rpm | 2011.4 | Hydrotu |
Turkey | TURUNCOVE 2X307KW | H-Francis D1=53cm | Hr=22.35m,Qr=2x1.65m3/s, n=750rpm | 2011.12 | Hydrotu |
France | 1x520KW | H-Turgo D1=53cm | Hr=110m,Qr=0.6m3/s n=750rpm | 2011.12 | Hydrotu |
Turkey | YAKNICA HEPP 3x4380KW | V-Kaplan D1=160cm | Hr=29.15m,Qr=3x17.2m3/s n=428.6rpm | 2012.6 | Hydrotu |
Turkey | ASYA HEPP 2x342KW | H-Francis D1=60.5cm | Hr=20.3m,Qr=2x2m3/s, n=600rpm | 2012.7 | Hydrotu |
SriLANKA | NAYA GANGA 2x1600KW | H-Pelton D1=120cm | Hr=155m,Qr=2x1.25m3/s n=428.6rpm | 2012.7 | Hydrotu |
Turkey | AKHAN-2 3x5.4MW | V-Francis D1=95cm | Hr=101.34m,Qr=2x1.4m3/s n=750rpm | 2013.4 | Hydrotu |
Turkey | Turga-2 2x6400KW | H-Pelton D1=123cm | Hr=529.0m,Qr=2x1.4m3/s n=750rpm | 2013.1 | Hydrotu |
Tajikistan | VANJ 2x400KW | H-Francis D1=55cm | Hr=20.0m,Qr=2x2.391m3/s n=600rpm | 2012.8 | Hydrotu |
USA | South Fork 2x650KW | H-Turgo D1=55cm | Hr=110.5m,Qr=2x0.708m3/s, n=720rpm | 2012.8 | Hydrotu |
Turkey | Sofular HES 2x1820KW | H-Francis D1=77cm | Hr=42.46m,Qr=2x4.95m3/s n=750rpm | 2013.6 | Hydrotu |
USA | McRoberts Creek 1x240KW | H-Turgo D1=50cm | Hr=134m,Qr=0.218m3/s n=1000rpm | 2013.8 | Hydrotu |
Greece | Lykostomo 1x420KW | H-Turgo D1=50cm | Hr=104m,Qr=0.5m3/s n=750rpm | 2014-04 | Hydrotu |
Turkey | Hizir HEPP 1x2000KW | H-Pelton D1=120cm | Hr=170m,Qr=1.41m3/s n=428.6rpm | 2014-03 | Hydrotu
|
Italy | Runner 100KW | H-Pelton D1=52.7cm | Hr=97m, Qr=0.14m3/s n=750rpm | 2014-04 | Hydrotu |
Albania | Saranta 1x700KW+1400KW | H-Francis + Turgo D1=61cm+63cm | Hr=100.0m, Qr=1.65m3/s+0.85m3/s n=1000rpm+600rpm | 2014-11 | Hydrotu |
Canada | Snowshoe 2x700KW | H-Turgo | Hr=115m, Qr=2x0.8m3/s n=720rpm | 2015-03 | Hydrotu |
Italy | Runner 250KW | H-Pelton D1=56cm | Hr=206.48m,Qr=0.14m3/s n=1000rpm | 2014-12 | Hydrotu |
Turkey | Ahmetli 2x5090KW+1600KW | H-Francis D1=115+72cm | Hr=53.76m,Qr=2x10.78+1x3.44m3/s, n=500rpm+750rpm | 2015-05 | Hydrotu |
Turkey | Generji 2x2600KW | H-Francis D1=76cm | Hr=149.46m,Qr=2x1.75m3/s, n=1000rpm | 2015-06 | Hydrotu |
Turkey | SMS-2 1x790KW | H-Francis D1=60cm | Hr=92.0m,Qr=1x1.0m3/s, n=1000rpm | 2015-03 | Hydrotu |
Pakistan | 370KW+420KW | H-Turgo D1=42cm+50cm | Hr=120m+136m, Qr=0.4m3/s+0.4m3/s, n=1000rpm | 2015-05 | Hydrotu |
Serbia | MHE Jelici 1x600KW+1x386KW | H-Franics+H-Turgo D1=58cm+55cm | Hr=80m, Qr=0.877m3/s+0.623m3/s, n=1000rpm+600rpm | 2016-06 | Hydrotu |
South Africa | Romans Bay Sea Farm 1x360KW | H-Francis D1=63cm | Hr=22.0m, Qr=2.0m3/s n=600rpm | 2016-07 | Hydrotu |
Serbia | MHE Virovci 1x305KW | H-Turgo D1=55cm | Hr=80m, Qr=0.5m3/s, n=600rpm | 2016-07 | Hydrotu |
Armenia | 1x2300KW | H-Francis D1=96cm | Hr=140.0m, Qr=1.787m3/s n=750rpm | 2016-08 | Hydrotu |
Turkey | Yakinca 4# 1x6016KW | L-Francis D1=185cm | Hr=31.0m, Qr=21.9m3/s n=250rpm | 2016-12 | Hydrotu |