
Small Impulse Turbine Turgo Hydro Turbine With Stainless Steel
Runner For Renewable Energy
Basic Parameter:
turbine type: Horizontal Turgo with one nozzle
Descrition:
The turgo turbine is a kind of impulse turbine and suited for heads
from 50m-250m, between Francis turbine and Pelton Turbine.
The feature is an angle of 22.5° is formed between the center line
of the nozzle jet and the rotational plane of the runner. The water
from the penstock is transformed into a high speed jet through the
nozzle. The water is directed obliquely to one side of the runner
and discharges at the other. The dynamic force of water flow makes
the runner rotate rapidly.
It consists main turbine runner, nozzle assembly, conduit part,
deflector control and hydraulic etc.
Turbine runner is the principle part of the turbine. runner made of
casting stainless steel. It has influence over the characteristic
of the turbine. The runner consists of vanes, the hub and the outer
ring of runner. The shape of vane is three dimension camber. The
outer ring applies to strengthen the runner and to reduce the loss
of wind.
The plane key set up between the runner and the main shaft in order
to transfer running torque. The elastic coupling is fitted on the
end of main shaft. The end of main shaft and the hole of coupling
are fitting and transfered the running torque by plane key.
Turgo turbine is characterized not only by high specific speed ,
high flow and even efficiency curve, but also by simple
construction, easy erection test and adjustment , reliable
operation, simple maintenance and low cost.
Turgo Turbine Applications:
1. Water head: 50m -- 250m
2. Capacity: 100KW -- 2000KW
3. Runner diameter: below1.5m.
4. Frequency: 50hz / 60hz
5. Generator Output voltage: 0.4KV, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interested in the Turgo turbine, you should send some
key parameters (such as net head, flow discharge, unit number,
frequency, voltage) in inquiry.
Water head range for Turgo Turbine selection.
Specifications:
Type | Horizontal Turgo turbine with one /two nozzles |
Water head | From 50m -- 250m. |
Installation capacity | From 100KW -- 2000KW |
Runner material | Stainless steel (0Cr13Ni4Mo) |
Generator type | Synchro generator |
Auxiliary Equipment | Governor, Inlet Valve, unit side panel, excitation system |
Competitive Advantage:
HYDROTU is the complete Chinese hydropower equipment supply,
consulting and engineering design venture in the field of
hydropower equipment. We provide the high quality Chinese
hydropower equipment with advanced technologies and integrated
services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with
customized support from project planning through implementation to
plant commissioning and service. Our principle: Customer’s project
is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic
solution of the global hydropower projects and aims to be the best
global supplier of hydropower equipment as well as the best
integrated services provider on the hydropower markets.
Our Factory is a special enterprise which manufacture and
researches Turgo turbine in China, the manufactory is the first
production of small Turgo turbine in China. Turgo turbine runner
use advanced casting technical produced, Turgo turbine export to
many countries such as USA, Canada,Turkey, France, Serbia, Greece,
Albania etc, won high opinion and praise.
Hangzhou Hydrotu Engineering Co.,Ltd.
HYDROTU are the complete Chinese hydropower equipment provider, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.
Hangzhou HydroTu Engineering Co. Ltd covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be one of the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.
1. Already Running Hydrotu's hydropower Project Partial 1.pdf
2. Already Running Hydrotu's Hydropower project Partial 2.pdf
3. Already Running Hydrotu's Hydropower project Partial 3.pdf
please visit our another website to download:
https://www.hydropower.com.cn/photosdrawings.asp
Main Reference List of Hydropower Project worldwide By Hydrotu
(V-vertical; H-Horizontal; D1-diameter; Hr- water head; Qr- rated flow; n-Speed)
Country | Project Name | Turbine Type | Project parameter | Operation Year | Supplier |
Turkey | KOZAK 2x2200KW | V-Kaplan D1=130cm | Hr=23.0m, Qr=11m3/s, n=500rpm | 2007 | Hydrotu |
Turkey | TAYFUN 2x500KW | H-Francis D1=53cm | Hr=55.0m, Qr=1.05m3/s n=1000rpm | 2007 | Hydrotu |
Turkey | GUNESLI 1200KW+600KW | H=Francis D1=60cm+53cm | Hr=65.0cm, Qr=2.2+1.1m3/s n=1000rpm | 2007 | Hydrotu |
Canada | KLEMTU 1x1800KW | H-Pelton D1=82cm | Hr=310m,Qr=0.66m3/s n=900rpm | 2007 | Hydrotu |
Turkey | GEMKOPRU 2x820KW | H-Francis D1=61cm | Hr=87.0m, Qr=1.12m3/s, n=1000rpm | 2008 | Hydrotu |
Turkey | UCKAYA 800KW+320KW | H-Francis &H-Turgo | Hr=107.6,Qr=0.8+0.36m3/s n=1000rpm | 2008 | Hydrotu |
Turkey | KOYABASI 750KW+320KW | H-Francis D1=60+50cm | Hr=80.0cm,Qr=1.13+0.487m3/s n=1000rpm | 2008.1 | Hydrotu |
Turkey | EGE-1 2X460KW | H-Francis D1=65cm | Hr=21.7m,Qr=2.52m3/s, n=600rpm | 2008.3 | Hydrotu |
Turkey | YILDIZLI 2X600KW | H-Francis D1=51cm | Hr=44.0cm,Qr=1.65m3/s, n=1000rpm | 2008.3 | Hydrotu |
Turkey | KAHRAMAN 2x750KW | H=Turgo D1=60cm | Hr=187.2m,Qr=0.503m3/s n=1000rpm | 2008.4 | Hydrotu |
Turkey | TIMARLI 3x2400KW | V-Kaplan D1=225cm | Hr=10.5m,Qr=26.67m3/s, n=750rpm | 2008.10 | Hydrotu |
Serbia | GORNE GARE 2X1100KW | H-Francis D1=56cm | Hr=63.5m,Qr=2.05m3/s, n=1000rpm | 2008.10 | Hydrotu |
Serbai | TEGOSNICA 410KW+250KW | V-Propeller D1=74cm | Hr=15.9m,Qr=3.1+1.9m3/s n=750rpm | 2008.10 | Hydrotu |
Serbia | LIVADE 1x450KW | H-Turgo D1=60cm | Hr=257.0m,Qr=0.21m3/s, n=1000rpm | 2008.10 | Hydrotu |
Turkey | GOK 3x3500KW | V-Propeller D1=160cm | Hr=28.7m,Qr=14.0m3/s, n=428.6rpm | 2009.6 | Hydrotu |
Turkey | Poyraz 2x1650KW | H-Francis D1=60cm | Hr=76.0m,Qr=2.535m3/s n=1000rpm | 2009.6 | Hydrotu |
Turkey | Kozan 2x1980KW | H-Francis D1=76cm | Hr=57.24m,Qr=4.0m3/s, n=750rpm | 2009.6 | Hydrotu |
Bosinia | Kuslat 2x600KW | V-Kaplan D1=140cm | Hr=8.0m,Qr=2x8.85m3/s, n=300rpm | 2009.7 | Hydrotu |
Turkey | KORUKOY HES 1x3000KW | H-Pelton D1=95cm | Hr=320m, Qr=1.1m3/s, n=750rpm | 2009.11 | Hydrotu |
Turkey | EGE-3 2x630KW | H-Francis D1=76cm | Hr=21.409m,Qr=2x3.35m3/s, n=500rpm | 2010.1 | Hydrotu |
Turkey | EGE-4 2X940KW | H=Francis D1=68cm | Hr=32.354m,Qr=2x3.6m3/s, n=500rpm | 2010.1 | Hydrotu |
Turkey | BIZNA 3X8500KW | V-Francis D1=145cm | Hr=56.5m,Qr=3x16.957m3/s n=428.6rpm | 2010.7 | Hydrotu |
Turkey | Bingol 2x3200KW+2x600KW | H-Francis D1=92.5+52cm | Hr=55.31m,Qr=2x6.7m3/s+2x 1.3m3/s,n=600+1000rpm | 2010.3 | Hydrotu |
Turkey | Tugra-1 2x2800KW | H-Pelton D1=82cm | Hr=411.728m,Qr=2x0.75m3/s n=1000rpm | 2010.5 | Hydrotu |
Turkey | EGER 2X960KW | H-Francis D1=84cm | Hr=24.62m,Qr=2x4.5m3/s n=500rpm | 2010.8 | Hydrotu |
Turkey | TONYA 2x1320KW | H-Pelton D1=90cm | Hr=182m,Qr=2x0.862m3/s n=600rpm | 2010.9 | Hydrotu |
Turkey | DEREBASI 2x5300KW | H-Pelton D1=140cm | Hr=425.6m,Qr=2x1.5m3/s n=600rpm | 2011.2 | Hydrotu |
Turkey | KILINCLI-1 2x970KW | H-Francis D1=82cm | Hr=26.8m,Qr=2x4.2m3/s, n=500rpm | 2011.2 | Hydrotu |
Turkey | MINI 50KW | V-Propeller D1=25cm | Hr=20m,Qr=0.35m3/s n=1000rpm | 2011.3 | Hydrotu |
Serbia | DONJE GARE 2x1000KW+500KW | H-Francis D1=59.5+52.5cm | Hr=77.7m,Qr=2x1.627m3/s+0.796 m3/s,n=1000rpm | 2011.4 | Hydrotu |
Serbia | KALIDRA 700KW | H-Turgo D1=60cm | Hr=204.5m,Qr=0.43m3/s n=1000rpm | 2011.4 | Hydrotu |
Turkey | TURUNCOVE 2X307KW | H-Francis D1=53cm | Hr=22.35m,Qr=2x1.65m3/s, n=750rpm | 2011.12 | Hydrotu |
France | 1x520KW | H-Turgo D1=53cm | Hr=110m,Qr=0.6m3/s n=750rpm | 2011.12 | Hydrotu |
Turkey | YAKNICA HEPP 3x4380KW | V-Kaplan D1=160cm | Hr=29.15m,Qr=3x17.2m3/s n=428.6rpm | 2012.6 | Hydrotu |
Turkey | ASYA HEPP 2x342KW | H-Francis D1=60.5cm | Hr=20.3m,Qr=2x2m3/s, n=600rpm | 2012.7 | Hydrotu |
SriLANKA | NAYA GANGA 2x1600KW | H-Pelton D1=120cm | Hr=155m,Qr=2x1.25m3/s n=428.6rpm | 2012.7 | Hydrotu |
Turkey | AKHAN-2 3x5.4MW | V-Francis D1=95cm | Hr=101.34m,Qr=2x1.4m3/s n=750rpm | 2013.4 | Hydrotu |
Turkey | Turga-2 2x6400KW | H-Pelton D1=123cm | Hr=529.0m,Qr=2x1.4m3/s n=750rpm | 2013.1 | Hydrotu |
Tajikistan | VANJ 2x400KW | H-Francis D1=55cm | Hr=20.0m,Qr=2x2.391m3/s n=600rpm | 2012.8 | Hydrotu |
USA | South Fork 2x650KW | H-Turgo D1=55cm | Hr=110.5m,Qr=2x0.708m3/s, n=720rpm | 2012.8 | Hydrotu |
Turkey | Sofular HES 2x1820KW | H-Francis D1=77cm | Hr=42.46m,Qr=2x4.95m3/s n=750rpm | 2013.6 | Hydrotu |
USA | McRoberts Creek 1x240KW | H-Turgo D1=50cm | Hr=134m,Qr=0.218m3/s n=1000rpm | 2013.8 | Hydrotu |
Greece | Lykostomo 1x420KW | H-Turgo D1=50cm | Hr=104m,Qr=0.5m3/s n=750rpm | 2014-04 | Hydrotu |
Turkey | Hizir HEPP 1x2000KW | H-Pelton D1=120cm | Hr=170m,Qr=1.41m3/s n=428.6rpm | 2014-03 | Hydrotu
|
Italy | Runner 100KW | H-Pelton D1=52.7cm | Hr=97m, Qr=0.14m3/s n=750rpm | 2014-04 | Hydrotu |
Albania | Saranta 1x700KW+1400KW | H-Francis + Turgo D1=61cm+63cm | Hr=100.0m, Qr=1.65m3/s+0.85m3/s n=1000rpm+600rpm | 2014-11 | Hydrotu |
Canada | Snowshoe 2x700KW | H-Turgo | Hr=115m, Qr=2x0.8m3/s n=720rpm | 2015-03 | Hydrotu |
Italy | Runner 250KW | H-Pelton D1=56cm | Hr=206.48m,Qr=0.14m3/s n=1000rpm | 2014-12 | Hydrotu |
Turkey | Ahmetli 2x5090KW+1600KW | H-Francis D1=115+72cm | Hr=53.76m,Qr=2x10.78+1x3.44m3/s, n=500rpm+750rpm | 2015-05 | Hydrotu |
Turkey | Generji 2x2600KW | H-Francis D1=76cm | Hr=149.46m,Qr=2x1.75m3/s, n=1000rpm | 2015-06 | Hydrotu |
Turkey | SMS-2 1x790KW | H-Francis D1=60cm | Hr=92.0m,Qr=1x1.0m3/s, n=1000rpm | 2015-03 | Hydrotu |
Pakistan | 370KW+420KW | H-Turgo D1=42cm+50cm | Hr=120m+136m, Qr=0.4m3/s+0.4m3/s, n=1000rpm | 2015-05 | Hydrotu |
Serbia | MHE Jelici 1x600KW+1x386KW | H-Franics+H-Turgo D1=58cm+55cm | Hr=80m, Qr=0.877m3/s+0.623m3/s, n=1000rpm+600rpm | 2016-06 | Hydrotu |
South Africa | Romans Bay Sea Farm 1x360KW | H-Francis D1=63cm | Hr=22.0m, Qr=2.0m3/s n=600rpm | 2016-07 | Hydrotu |
Serbia | MHE Virovci 1x305KW | H-Turgo D1=55cm | Hr=80m, Qr=0.5m3/s, n=600rpm | 2016-07 | Hydrotu |
Armenia | 1x2300KW | H-Francis D1=96cm | Hr=140.0m, Qr=1.787m3/s n=750rpm | 2016-08 | Hydrotu |
Turkey | Yakinca 4# 1x6016KW | L-Francis D1=185cm | Hr=31.0m, Qr=21.9m3/s n=250rpm | 2016-12 | Hydrotu |