
Customized High Performance-Cost Ratio Boiler Air Preheater for Industry
Product Introduction
Principle
Functions
1. Improve and Strengthen Combustion.
The air after the heat exchanger enters the furnace, which
accelerates the drying, ignition and combustion process of the
fuel, ensures the stable combustion in the boiler and improves the
combustion efficiency.
2. Enhancing Heat Transfer
Because the combustion in the furnace has been improved and
strengthened, and the temperature of hot air entering the furnace
has been increased, the average temperature level in the furnace
has also been raised, so the radiation heat transfer in the furnace
can be strengthened.
3. Reducing the loss in the furnace, lowering the exhaust gas
temperature and improving the thermal efficiency of the boiler.
Because of the stable combustion in the furnace and the enhanced
radiation heat exchange, the chemical incomplete combustion loss
can be reduced. On the other hand, the waste heat of flue gas is
utilized by the air preheater, which further reduces the loss of
exhaust gas, thus improving the thermal efficiency of the boiler.
According to experience, when the air in the preheater rises by 1.5
C, the exhaust gas temperature can be reduced by 1 C. After
installing the air preheater in the boiler flue, if the air waste
heat can be 150-160 C, the exhaust gas temperature can be reduced
by 110-120 C, and the thermal efficiency of the boiler can be
increased by 7%-7.5%. Fuel can be saved by 11%-12%.
4. Hot air can be used as fuel desiccant.
Hot air is an important desiccant and pulverized coal conveying
medium for grease powder system in power plant boilers.
Certification
Advantages
1. Preheated air increases combustion rate and then increases steam generations of boiler. |
2. Due to higher temp. of air,furnace temp.increases,so low grade coal can be burnt efficiently. |
3. Air heated by heat of exhaust gases.It reduces fuel consumptions.Therefore thermal efficiency of boiler increased. |
Different types
For the use in Steam Generators (boilers)in Thermal power stations
of Utility power stations, there are two types of design of the
Airpreheaters. One is a tubular type built into the boiler outlet
Flue_gas ducting and another one is of the regenerative type known
as Ljungstrom (named after the name of inventor) Regenerative Air
Pre Heater(RAPH),a rotating type. This may be horizontal (now very
common in power generation utilities) or vertical.
Company Profile
Our main products cover Utility Boiler, HRSG Boiler, coal-fired , oil(gas) -fired,
coal-water-slurry-fired and garbage-fired steam/hot water boilers,
organic heat carrier boilers, etc., and Boiler spare parts
(Economizer, Finned tube, Header, Steam drum, Superheater, Water
wall panel, Air preheater, Cyclone separator, etc., which are
widely used in power generation, heat supply, chemical engineering,
textile, food, paper, road building, plastic, rubber and wood
working industries.
1100 employees, 400,000 ㎡ with fixed assets amounting to USD
110,000,000, 34 years experience, ISO9001, SO3834, EN12952
certificated, 150km expressway to Shanghai,60km state road to
Suzhou or Wuxi, this is how we keep superior quality and
competitive offers for global valued customers.
Our products' quality is ensured by advanced, excellent facilities
and manufacturing equipment. We have introduced 400 sets of
advanced processing and inspection equipment, including plasma
cutting machine, NC drilling equipment, automatic welding system,
welding equipment and real-time online imaging detection system,
etc., which successfully ensure excellent quality of our products.
Collect all parameters for product design, make design acording to
the Supervisory Regulations on Boiler Safety Technology, other
laws, rules, regulations and professional standards, and 100% meet
the product standards and customers' requirements.
The quality and technical supervision administration authorizes the
inspection agency stationed on site to supervise, inspect and test
the process of boiler manufacturing.Accept supervision or
confirmation of the third party or Customer's representative over
the process of boiler manufacturing.
Different types
For the use in Steam Generators (boilers)in Thermal power stations of Utility power stations, there are two types of design of the Airpreheaters. One is a tubular type built into the boiler outlet Flue_gas ducting and another one is of the regenerative type known as Ljungstrom (named after the name of inventor) Regenerative Air Pre Heater(RAPH),a rotating type. This may be horizontal (now very common in power generation utilities) or vertical.
Zhangjiagang HuaDong Boiler Co., Ltd.
Hua Dong Boiler Co., Ltd. is a high-tech enterprise specialized in manufacturing boilers. Established in early 1985s, has two manufacturing bases, this company covers 400,000㎡ with fixed assets amounting to USD 110,000,000. There are 1100 employees including 150 technicians and 600 coded welders. Hua Dong holds the manufacturing licenses for Grade A boilers and Grade A1&A2 pressure vessels issued by Chinese General Administration of Quality Supervision, Inspection and Quarantine; also it holds the "S" and "U" "NB" stamps issued by American Society of Mechanical Engineers; meanwhile, this Company has passed the certification of ISO9001, SO3834, EN12952 Quality Management System.
"Hua Dong" boilers include Utility Boiler, HRSG Boiler, coal-fired , oil(gas) -fired, coal-water-slurry-fired and garbage-fired steam/hot water boilers, organic heat carrier boilers, etc., and Boiler spare parts (Economizer, Finned tube, Header, Steam drum, Superheater, Water wall panel, Air preheater, Cyclone separator, etc., which are widely used in power generation, heat supply, chemical engineering, textile, food, paper, road building, plastic, rubber and wood working industries. "HD" boilers are honored as "Famous Production in Jiangsu Province", " Jiangsu High-Tech Product" and "Jiangsu Energy-Saving Product". "HD" brand is a "Famous Brand in Jiangsu Province". We are a qualified supplier for the top three boiler manufacturers in China(Harbin Boiler Co., Ltd., Dong Fang Boiler Group Co., Ltd., Shanghai Boiler Works Ltd.,). So far, Hua Dong Boilers have served 10000 customers, which sell well all over China and are exported to USA, Australia, Russia, Kazakhstan, India, Indonesia, South Africa, Brazil, and Southeast Asia.
We strive to manufacture "Safe, Efficient, Energy-Saving and Environment-Friendly" boilers, provide new-type products in excellent quality, serve users sincerely to their satisfaction, and be a top supplier of boilers in China.
Declaration
Zhangjiagang Hua Dong Boiler Co.,Ltd has no subsidiaries.
Packaging & Shipping
Company Business
Our products have been wildly used in power plants and large international companies overseas.