Male Reference Luer Slip Connector For Testing , Female Luer Connectors For Leakage/iso80369 gauges/iso594 gauge

Male Reference Luer Slip Connector For Testing , Female Luer Connectors For Leakage

ISO 80369-7 Fig C.2 Male reference luer slip connector for testing female luer connectors for leakage, separation from unscrewing, stress cracking and non-interconnectable characteristics

ISO 80369-7 FIGURE C.2 MALE REFERENCE LUER SLIP CONNECTOR

ISO 80369-7:2016 cancels and replaces the first edition ISO 594-1:1986 and the second edition of ISO 594-2:1998, clauses, subclauses, tables, figures, and annexes of which have been consolidated and technically revised. Because of this, ISO 594 connections must be tested per ISO 80369-7 requirements. Read: Discussion on the change.

Compatibility/Interchangeability Between ISO 594/1 Figure 5 and ISO 80369-7 Figure C.245

The ISO 594/1 Figure 5 Male Reference Conical Fitting is replaced by ISO 80369-7 Fig C.5 Male Reference Luer Slip Connector. The ISO 80369-7 Figure C.2 is not identical to the ISO 594/1 Figure 5 Reference Fitting, so it cannot be certified as ISO 80369-7 Figure C.2. The good news is that the ISO 80369-7 Figure C.2 Male Reference Luer Slip Connector is backward compatible with the ISO 594/1 Figure 5 Reference Fitting; so it can be certified and used in ISO 594/1 designated testing.

For those who just need to know the full details...

The minimum conical length changed from the ISO 594/1 Figure 5 requirement of 7.5mm minimum; to the ISO 80369-7 Figure C.2 requirement of 10.5mm minimum. I think it is obvious to see that an ISO 80369-7 Figure C.2 Male Reference Luer Slip Connector with a certified minimum length of 10.5 will always meet the ISO 594/1 Figure 5 Male Reference Conical Fitting requirement of 7.5mm minimum.

tatement of Objective:
The Luer Connection has had specification number changes over the years. Because of that some product drawings, specifications and procedures reference specification numbers which are obsolete and which have been replaced by new numbers. This document gives the directive as to how these obsolete numbers will be translated for compliance to the most current specification.

Directive:
Any reference to ANSI/HIMA MD 70.1 is replaced with ISO 80369-7.
Any reference to ISO 594/1 is replaced with ISO 80369-7.
Any reference to ISO 594/2 is replaced with ISO 80369-7.

Engineering Justification:

ANSI/HIMA MD 70.1
ANSI/HIMA MD70.1 by HIMA was ratified in 1983. That ratification included a sunset provision that required review and re-ratification in 1989 to maintain validity. In 1986 ISO 594 was ratified as the replacement for ANSI/HIMA MD 70.1. Because the ISO 594 was the subsequent and superior standard, no committee was ever convened to review and re-ratify ANSI/HIMA MD70.1. Technically ANSI/HIMA MD70.1 has expired and is no longer valid. Luer connections manufactured under either ANSI/HIMA MD70.1 or ISO 594 are fully interchangeable. Differences between the two specifications are expected but are technically insignificant to the function of the specified connections. In a dispute the newer ISO 594 is to be given precedence over the older ANSI/HIMA MD 70.1.

ISO 594/1 and ISO 594/2
ISO 594 was ratified in 1986. In 2016 both ISO 594/1 and ISO 594/2 have been superseded by ISO 80369-7 as part of the industry wide drive to have non-interchangeability between small bore connectors. Luer connections manufactured under either ISO 594 or ISO 80369-7 are fully interchangeable and technically equivalent. Differences between the two specifications are expected but are technically insignificant to the function of the specified connections. In a dispute the newer ISO 80369-7 is to be given precedence over the older ISO 594.

Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cost and enhance enterprise’s international competitiveness.

Kingpo is accredited by International Electrotechnical Commission(IEC) and becomes a nominated supplier and is officially issued a CBTL certificate.We are now among the world’s leading laboratory testing equipment manufacturer to produce the highest level and more standard testing equipment for global Electrotechnics labs becoming nominated supplier of NEMKO,UL,PHILIPS,CTK,CVC(Vkan Certification & Testing Co.,Ltd),Dongguan Quality Testing,China Household Electric Appliance Research Institute,Russia National Standard Institute,Belarus National Standard Institute,Korea National Standard Institute,etc.Lamp cap gauges and testing equipments produced by Kingpo,which are calibrated by CNAS and ilac-MRA ,have a high international reputation.

Kingpo aims at manufacturing world class testing equipment for Chinese labs,establishing an independent R&D center and introducing foreign state-of-the-art technology and international high-tech talents.Adopting a creative design concept,taking sensor data acquisition as forerunner,computer control technology as lead,imported transmission device with high accuracy and low noises,we have developed more than one hundred and sixty products.

Lab software Lims system　

Material combustibility testing equipment　

ELectric tool testing equipment

Plug and socket testing equipment

Switch service life testing equipment　　　

Electrical accessories testing equipment

Luminaire testing equipment　　

Household appliances testing equipment　　　

Anti water spray testing equipment

Wire and cable testing equipment

IT product testing equipment　　　　

Battery testing equipment

Kingpo’s domestic customers include Entry-Exit Inspection and Quarantine Bureau, Bureau of Technical Supervision,Product Quality Supervision and Inspection Institute,UL Lab(Underwriter Laboratories),TUV Rheinland,SGS and other electronic manufacturer.Our products are exported to international market and have also established distributorships in HK,Vietnam,Singapore,Thailand,Iran,India,

Africa,New Zealand,Australia ,Germany and so on.

Service is an essential factor to improve enterprise’s competitiveness.Therefore,Kingpo has always made every effort in improve service level and service value.Before sale,we have professional engineering team to provide customers with comprehensive consultant and customized service.After sale,we have after-sale team to offer customer timely and satisfying technical support and product maintenance.

By means of excellent product competitiveness and complete service,our company has won numerous customers high praise and sincere trust.In complying with technical improvement and increased efficiency and quality assurance of these products ,we insist on providing high end products to market and dedicating to being a leader in testing equipment industry.