China Categories
All Categories
Hotel Movable Folding Partition Walls With Aluminum Trolley And Ceiling Tracks
Ask Latest Price
Brand Name:BANGE
Model Number:85 mm folding partition walls
Certification:ISO9001
Price:US Dollars 80 - 120 per square meters
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability:50000 square meters per month
Delivery Time:15-20 days
Company Data
Verified Supplier
Contact Person
Buffy
Business Type:
Manufacturer Distributor/Wholesaler Agent Exporter Trading Company Seller
Officials:
No. 5-37, Fengxi 2nd Road, Hailong Street, Liwan District, Guangzhou, China
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
Hotel Movable Folding Partition Wall with Aluminum Trolley and Ceiling Tracks
How to operate the folding partition walls
All operations should be gentle and should pay attention to safety. Facing the screen station, use both hands to grab the screen and pull the screen in the direction of the rails; turn the screen in the direction of the rails.
After pushing the screen to its place, fix the screen. Tip: When pushing the screen to the intersection, you should pay attention to the direction of the rail, and then gently push the screen along the rail to the position where it should be placed.
Second, how to fix a multi-directional partition
Hold the partition with one hand, and put the handle in the hexagonal steel at 1100mm of screen side material (the position shown in Figure 3) in the other hand. Hold the handle and turn it clockwise by 180 degrees (or continuously shake). ;, The telescopic seal inside the screen will pop up to fix the screen.
Insert the handle into the groove on the side of the screen, and pull the handle upwards to open the expansion screen inside the screen to fix the screen. After the entire group of screens are placed, check whether the screen is straight, whether it is on the same plane as the rails, and if it is not straight, retract the upper and lower expansion seals until the screen is flat.
Third, how to operate multi-directional telescopic panel screen
Normally, the last side of each group of screens is a retractable screen. Push the screen to the position where it should be placed. Then move the handle up and down in the side material groove to pop up and down the active seal (as shown in Figure 1). Show the position), then put the handle in the operation hole on the surface of the expansion screen (the position shown in Figure 2), and turn it counterclockwise until the side of the telescopic aluminum plate is pressed against the wall.
Fourth, how to operate the multi-directional screen door in door
Push the door in the door to the position where it should be placed and the screen in front is tight. Insert the handle into the groove on the side of the screen (as shown in Figure 4), and pull the handle upwards to open the air-seal seal screen on the inner side of the screen. Open the small door, insert the handle into the operation hole of the door leg on the other side of the screen (as shown in Fig. 5), and pull the handle upwards to open the expansion screen on the other side of the screen to fix the screen.
V. How to receive multi-directional screens
1. If there is a door in the door, first turn the square hole on both sides of the door to rotate 180 degrees, loosen the upper and lower seals through the transmission wheel, and then close the door in the door;
2, open the last screen of the telescopic aluminum plate and the upper and lower seals;
3. Retract the telescopic aluminum plate of the last screen so that the distance it produces can at least turn the distance of the screen, which is generally about 140mm.
4. Push the screen to the position of the screen in the direction of the track.
5. After each group of screens is collected in the same way, press each two screens tightly to minimize the distance between the screens and the screens. If necessary, you can open the up and down motion seals of the last screen that is housed at the hidden plate so that it presses against the rails and the ground. This will prevent others from easily pulling the screen out.
What is the door in doors
With the renovation of hotels, restaurants, tea houses, and modern and simple office meeting rooms, the practicality of the event partition has gradually become popular and widely used. In the daily partitions, it is inevitable that you will need to use the door in the door, so that there is a passage in the separated space. We will now introduce the door in the middle of the partition.
The so-called door in the door, is to open a set of small doors in the partition door to facilitate access. There are two kinds of conventional door doors, one is a single door, and the other is a double door.
Single pass door is generally 700-800mm wide and 2100mm high; double door is 1600mm wide and 2100mm high.The door door trim can be unified according to the ordinary door panel decoration, but in some cases, the door door needs to do a separate style.
| Series | BG65 | BG80 / BG85 | BG100 & BG125 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Track system | Single or twin point | Single or twin point | Single or twin point |
| Panel thickness | 65mm | 80mm / 85mm | 100mm |
| Panel height | Up to 4000mm | Up to 6000mm | Up to 18000mm |
| Max height | 4000mm | 6000mm | 18000mm |
| Panel width | 600-1230mm | 600-1230mm | 600-1230mm |
| Frame construction | Aluminum frame | Aluminum frame | Aluminum frame |
| Face material | 9mm | 9mm / 12mm | 12mm |
| Fire safety | Optional Class I or O | Optional Class I or O | Optional Class I or O |
| Vertical profiles | Aluminum anodised with sealing profiles | Aluminum anodised with sealing profiles | Aluminum anodised with sealing profiles |
| Retractable seals | Aluminum black with double rubber seals | Aluminum black with double rubber seals | Aluminum black with double rubber seals |
| Operation of seals | Manual, with supplied operating handle | Manual, with supplied operating handle | Manual, with supplied operating handle |
| Locking | Optional lock to pass doors | Optional lock to pass doors | Optional lock to pass doors |
| Pass doors | Single open in panel or double open in two panel | Single open in panel or double open in two panel | Single open in panel or double open in two panel |
| Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
| Weight | Approx 22-35kg/sq M | Approx 25-40kg/sq M | Approx30-48kg/sq M |
| Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather, Insulation board, Fireproof board, Wall paper, Vinyl, Painting, etc. (Customized) | ||
Kinds of sliding partition walls
Rolling partition walls
Connected by a narrow strip of wood, plastic or metal, a coilable
partition. Metal sheets and plastic sheets can be rolled into
hinges, and wooden strips are perforated with ropes or wires. Roll
partitions are horizontal and vertical. The horizontal type is
provided with upper and lower guide rails, and the upper part is
provided with a set of pulleys every 3 to 5, and can be slid along
a straight line or an arc; it can be rolled to one side or both
sides. The roll-type partition can be manually or electrically
driven. Both the horizontal type and the vertical type are wound on
the reel, and the rolled-up partition has a small volume and can be
hidden in the storage box inside the wall or the ceiling.
Hanging sliding partition walls
A large area of the partition is suspended in the upper room
space, and the motor is used to adjust the partitions for lifting
and lowering, and some can be moved left and right. Space can be
fully enclosed or partially partitioned. This partition is mostly
used in buildings such as upper exhibition halls, auditoriums, and
multi-purpose halls. It is also used in recording halls to adjust
the volume, and also used as a fireproof curtain in theater stage
booths.
Folding partition walls
The folding partition wall is composed of a plurality of
partitions. There are two kinds of wide fans and narrow fans. The
partition fan used in the wide fan type is the same as that used in
the push-type movable partition. The upper part of each partition
fan is mounted on the guide rail with a set of turnable pulleys,
and the hinges are used to connect the partition fans and can be
folded and pushed into the storage when not in use. room. There are
many factors that are affected by the separation, and it may not be
easy to promote the improper handling. Therefore, there is a
double-fan folding type that uses two partition fans. Double-folded
soft, made of thin steel sheet made of retractable hinged hinge
frame, above the pulley, into the guide. Both sides of the hinged
frame are equipped with soft artificial leather or plastic cloth,
which can be folded open like an accordion. This partition is
lightweight, beautiful, easy to install, and can be curved and
flexible. It is also possible to laminate thin steel plates and
sound-absorbing materials in the sandwich to improve sound
insulation.
Transitional activity partition
A partition that can be moved along the track that consists of
multiple partitions. The width of each partition is generally
60-120 cm. The height is dependent on the need, and the partitions
used for construction and assembly of movable partitions are the
same. This kind of partition has two kinds of sliding and sliding.
Sliding type, the lower part is equipped with pulleys, ceiling and
floor with grooved guide rails, suitable for larger movable
partitions. The lower rail of the sliding partition is hidden on
the ground, and it is easy to get rid of clogging, and affects the
use and appearance of the ground. On the upper slide type,
generally two sets of pulleys in the direction of rotation are
mounted on the upper part of each partition fan, and move along the
track in one direction. It is also possible to install an L-shaped,
T-shaped, or cross-shaped track on the plane so that the partitions
can change direction and divide the large space into a plurality of
small spaces. The partition fan can be pushed or moved electrically
according to the width and weight of the partition. When not
separated, the partitions can be folded on both sides or hidden
into the storage room.
Assembled activity partition
According to the use requirements removable removable partition.
Constructed from lightweight partition units that are the same
height as the room's ceiling or only part of the room's height. The
partition unit is usually 6 to 12 cm thick and 60 to 120 cm wide.
It is framed by wood or thin-walled metal profiles, double-sided
plywood, fiberboard or plasterboard. Some of them are also filled
with honeycomb paper to increase rigidity, or to fill mineral wool
to improve sound insulation. The installation method of the
partition with the same height as the roof of the room is to place
the upper jaw with a groove in the ceiling first, insert the
partition fan into the groove, and place two spacers or
height-adjustable bolts under each partition fan. After
positioning, use the skirting board to cover the gap in the lower
part. This type of partition is used for houses, schools, etc. that
change space separation for a long time. Only the part of the room
with a high degree of ditch is made of a short partition. Firstly,
the low-rise partition fan is installed on a pillar that can stand
on the ground. It can also use bolts or hinges to connect several
short partition fans at an angle, or even form a foldable Chinese
screen. The height may be determined according to needs, for
example, to block the sight of the standing person, 1.5 to 2 meters
may be used, and for example, the sight line for blocking the
sitting person may be 1.2 to 1.5 meters. Offices, restaurants,
exhibition halls, etc. can also be used to open up and down the
partition.
Send your message to this supplier
You May Like
Movable Folding Partition Walls , Acoustical Folding Partitions For Gym And Theatre
Leather Surface VIP Room Sound Proof Doors For Office / Commercial Place
Bare Finish Folding Partition Walls , Acoustic Movable Partition For Wedding Facility
Red Sliding Folding Partitions Movable Walls For Exhibition Place
Conference Room Folding Partition Walls Customers Own Material Finish
Training Room Folding Divider Walls , Folding Wall Panels For Home Studio Recording
Sound Proof Doors Folding Panel Partitions Metal Partition Frame Ceiling
Melamine Carpet Finish Folding Glass Partitions For Meeting Room
Red Fabric Plywood Single / Double Door Folding Partition Walls BUNGE Standards
Veneer Gypsum Acoustic Folding Partitions , Accordion Folding Partitions For Restaurant
Sliding Multi-Function Hall Folding Partition Walls , Movable Partitions Walls
Inquiry Cart
0