20 X 80 Aluminum Glass Frame Extrusion , Wood Finish Aluminum Door Frames

Wood 20 x 80 aluminium profile glass frame aluminum door frame sections

Product Description

Doors and Windows installation

The installation procedure: the window frame is in place, the frame is fixed to the box, the hardware fittings, the antiglass, the cleaning.

The main points of the essay:

1: and all floor window frames should be horizontal, vertical and horizontal, horizontal and horizontal.

2: window frame and wall body fixed, first fixed upper frame, after fixed frame, use plastic expansion bolt is fixed.

3: The inner cavity of the expansion joint between the frame and the hole is filled with the plastic foam, the foaming agent and other elastic materials, and the surface is sealed with sealant.

The process of installing and breaking the aluminum alloy doors and Windows:

1: Doors and Windows installation must be strong, the number of embedded parts, the location, buried connection methods must comply with the design requirements, used for fixed every reinforced steel fasteners must not be less than 3, the spacing should be no greater than 300 mm, is apart from the steel end should be no greater than 100 mm; In addition to stainless steel, the surface of reinforced section, fasteners and hardware is treated with corrosion resistant coating.

2: The installation of doors and Windows and glass should be done after the wet work method is completed and hardened. When the doors and Windows installation, the ambient temperature should not be lower than 5 ℃;

3: When the window is fixed with the wall, the frame should be fixed first, then the frame should be fixed: the concrete hole should be fixed with the nail or plastic expansion bolt. The brick wall hole should be fixed with plastic expansion bolts and not fixed in the place of brick. The holes in which the embedded iron parts are set shall be fixed by the method of welding, or the holes shall be made by the fasteners on the pre-buried parts, and then the fasteners shall be fixed;

4: When installing a composite window, the opening of the window should be set up or reserved. Has grown two millimeters has grown two millimeters spell is connected with the mouth of the cave: spell materials and concrete lintel or connected to the columns should be set embedded iron, adopts the method of welding is fixed, or press fasteners on the embedded parts base hole, then with fasteners; When connecting to a brick wall, it is necessary to insert the two ends into the reserved hole, then use the C20 fine stone concrete. The two window frames should be connected to the long line, and then the fasteners should be tightened in two directions, and the spacing should be less than or equal to 400mm. Sealing between the fasteners and the bars of the frames and the bars.

5: When doors and Windows are made of pre-buried wood bricks and walls, wood bricks should be embalmed.

6: The inner cavity between the window frame and the opening of the hole should be filled with the elastic material such as the closed-hole foamed plastic and the foamed polyphenylene, and the surface is sealed with sealant. Suitable insulation and sound insulation material should be used for the project of high insulation and sound insulation.

7: The doors and Windows are clean, without scratches, bruises and rust. The coated surface is smooth, flat, uniform and no porosity. It is strictly forbidden to install scaffolds or heavy weights on doors, Windows, and trays, and prohibit the stamping of window frames, Windows or Windows. The surface of doors and Windows is stained with oil, should be washed with water soluble washing agent, avoid to use coarse or corrosive to wash material

Corporate Introduction :

Guangdong Yong long Aluminum Co., Ltd. is located in the No. 10 (Sanjiang market) of Leping Town, Sanshui District, Foshan. The company was founded in 1997. It is a comprehensive and large-scale aluminum profile enterprise integrating the research and development, production and sales of aluminum alloy profiles. The company is leading the "Hongying" brand. Strong comprehensive strength and excellent service make Yong long "Hongying" sell well all over the country and exported to Southeast Asia, Europe, South America and many other countries.

The company has 900 employees, including 120 high and intermediate engineering technology and management personnel, with advanced and perfect design, production, testing and testing methods as well as perfect sales network and after-sales service system. The products sell well in more than 10 national and foreign ports, Australia and Taiwan areas.

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.

Welcome to visit our company !

Choose us & contact us !

Corporate Overview:
Guangdong yong long aluminum Co.,LTD. is located in Shanshui District, Foshan City, Leping Group on the 10th, the company was founded in 1997, is set aluminum profile research and development, production and sales as one of the integrated large-scale aluminum enterprises, "Hong surplus" brand. Strong comprehensive strength and quality of service, so that Wing Lung "Hong Ying" selling all over the world, exports to East Asia, South America, South Africa, the United Kingdom, Dominican,Russia and other countries.

Corporate Certification:
After years of development, the company passed the ISO9001: 2000 quality system certification, the international standard product certification. Yonglong Aluminum has won the "Guangdong Province Famous Brand", "Guangdong Province Famous Brand", "ISO14001 Environmental Management System Certification", "OHSMS18001 Occupational Health and Safety Management System Certification", "Adopting International Standard Products" Is "," China's quality products "and other certificates. Companies adhere to the scientific concept of development, by strengthening the comprehensive management and increase innovation, and continuously enhance the energy-saving emission reduction enterprises to accelerate into the environment-friendly modern enterprise list.

Corporate Culture and Philosophy:
The company insisted: "unity and progress, pioneering and innovative, high quality of this, service to win" business purposes, the new full cooperation with customers, Gongtuo career, create a better future.
 

We have participated in exhibitions all over the world in order to expand the market, made a lot of customers and friends, quality and price guarantee, orders continue to flow

When you work with us, you can expect top-quality resources and parts, excellent customer service, and to be treated like family. We’re invested in this industry and our clients. When you work with us, you can tell the difference!

We welcome customers from all around the world!
We provide the best price and best service!