
-Blade dryer is low speed churned drier that equipped oars inside
equipment. The damp raw material is churned to fully connect with
hot carry and surface, its structure can be horizontal, double
scrolls of force scrolls .
-There are hot air style and transfer style two styles. The drying
in hot air style is completed through connection of hot air and
material. In transfer style, material is connected with hot surface
to drying, it can prevent pollution of material. The air outlet is
few, efficiency is high, small size, save energy and prevent
pollution of air.
-Compact structure, small volume, coefficient of thermal
conductivity is high, best heat effect. In general heat effect
attains to 80%-90%,it is kind of device with saving energy.
-Low revolution, it is difficult to break into shaping of granule
and slice raw material.
-To raw material, wide use, easy to operate and raw material is
adjustable from few minutes to few hours.
-The auxiliary equipment is simple, so that it can save lots of
cost.
-There are multiple purpose such as drying, cooling, recovering
air, responding heating…
It is suitable for drying in plastic, resin, inorganic compounds
machine, fertilizer, feed, dyestuff, starch, mud and so on.
Preface
specitem | QJ3 | QJ 9 | QJ 13 | QJ 18 | QJ 29 | QJ 41 | QJ 52 | QJ 68 | QJ 81 | QJ 95 | QJ 110 |
Heat transferring area m2 | 3 | 9 | 13 | 18 | 29 | 41 | 52 | 68 | 81 | 95 | 110 |
effective volume m3 | 0.06 | 0.32 | 0.59 | 1.09 | 1.85 | 2.8 | 3.96 | 5.21 | 6.43 | 8.07 | 9.46 |
range of rotating speed r.m.p | 15-30 | 10-25 | 10-25 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 5-15 | 5-15 | 5-10 |
power kw | 2.2 | 4 | 5.5 | 7.5 | 11 | 15 | 30 | 45 | 55 | 75 | 95 |
A width of vessel mm | 306 | 584 | 762 | 940 | 1118 | 1296 | 1474 | 1652 | 1828 | 2032 | 2210 |
B total width mm | 736 | 841 | 1066 | 1320 | 1474 | 1676 | 1854 | 2134 | 1186 | 2438 | 2668 |
C length of vessel mm | 1956 | 2820 | 3048 | 3328 | 4114 | 4724 | 5258 | 5842 | 6020 | 6124 | 6122 |
D total length mm | 2972 | 4876 | 5486 | 5918 | 6808 | 7570 | 8306 | 9296 | 9678 | 9704 | 9880 |
E distance of material inlet & outlet mm | 1752 | 2540 | 2768 | 3048 | 3810 | 4420 | 4954 | 5384 | 5562 | 5664 | 5664 |
F height of center mm | 380 | 380 | 534 | 610 | 762 | 915 | 1066 | 1220 | 1220 | 1220 | 1220 |
H total height mm | 762 | 838 | 1092 | 1270 | 1524 | 1778 | 2032 | 2362 | 2464 | 2566 | 2668 |
N steam inlet “N” (inch) | 3/4 | 3/4 | 1 | 1 | 1 | 1 | 11/2 | 11/2 | 11/2 | 11/2 | 2 |
O water outlet "o" (inch) | 3/4 | 3/4 | 1 | 1 | 1 | 1 | 11/2 | 11/2 | 11/2 | 11/2 | 2 |
◆ QJ Series Hollow Blade Dryer( Hollow impeller Dryer)(Hollow
Paddle Dryer) is Applicable for drying or cooling of paste,
particle, powder and slurry state of material, perform the process
of drying, cooling, heating, sterilizing, reacting and combustion
under low temperature. The special stirring and heating
transferring blade, makes high heat transferring efficiency, and
provide self-cleaning function. The special chock shaped stirring
and heat transferring blade has high heating efficiency and
self-cleaning function of the heating transferring surface.
Hollow chock shaped blades are concentrated on the hollow shaft.
Heat media flow through the blade from the hollow shaft. The heat
transferring area in the effective volume is very high. The
temperature range of heating media is -40 ℃ to 320 ℃ . It might be
steam, or liquid state, such as steam, thermal oil etc. Indirect
heating, there's no heat being carrying out by air. All heat is
utilized for to drying the material except the lost of heat
insulation layers. The surface of chock shaped blade has
self-cleaning function. The relative movements of the product
particles and the chocked shaped surface might clean the material
attached to the chock shaped surface, so to keep the cleanliness of
heat transferring surface during working. The shell of hollow blade
dryer is Ω shape. 2 or 4 pieces of hollow stirring shaft are
usually equipped in the shell. To avoid any leakage of material,
there're sealed terminal cover and top cover with the shell. The
heat transferring media flow through the rotation connector,
jacket's shell and hollow stirring shaft. To ensure best
transferring effect, the hollow stirring shaft adopts different
interior structure in accordance with different heating media.
Changzhou Yibu Drying Equipment Co., Ltd