
Hollow Shaft Slip Ring with No Packet Loss and Low Return Loss Smooth Running
Description
The USB slip rings is another important slip ring specially
designed for USB signals.Used for transmitting the signal of USB1.0, USB2.0, and USB3.0. With steady transmission,
no packet loss, no string of code, return loss is small, low
insertion loss, etc.
It helps a lot in communicating data transmission between the
rotating platform and a stationary platform. It provides the best
technical solution to the large-capacity data system connected
between the rotating members.
Specification | |
Circuits | 1-24 circuits |
Operating Speed | 0-500rpm |
Working Temperature | -20℃~ +60℃ |
Working Humidity | 60%RH or higher |
Electrical: | |
Voltage Rating | 380VAC/DC or higher |
Current Rating | 2A/5A/10A/15A per circuit |
Dielectric Strength | ≥1000V@50Hz between each circuit |
Insulation Resistance | 1000MΩ@ 500VDC |
Electrical Noise | 1mΩ Min |
Mechanical: | |
Contact Material | Precious metal |
Lead Wire Length | Standard 300mm (11.811inch) |
Housing Material | Aluminum alloy |
Torque | ≤9.25 g·m (for reference ) |
Protection | IP54 or higher |
Product display
JINPAT Electronics Co., Ltd
JINPAT Electronics, founded in 1996, is a national high-tech enterprise specializing in R&D, manufacturing and sales of high-precision slip rings. Typical products like Capsule Slip Ring, Through-bore Slip Ring, Large-current Slip Ring, Coax Rotary joint, Fiber Optic Slip Ring, Separate Slip Ring, Pin Slip Ring.
Besides, customization is supported to cater to the different application in that slip ring can be designed exclusively integrated with Ethernet, USB, HDMI, Sensor, CAN Bus, Thermocouple, RS232, RS422 and so forth.