ASTM A335 P22 Alloy Steel High Temperature Tube / Seamless Steel Tube

ASME SA335 Seamless ferritic alloy steel pipes for high temperature service

Standard: ASTM A335 / ASME SA335

Steel grade: Ferritic alloy steel

A 450/A 450M Specification for General Requirements for Carbon Ferritic Alloy Steel Tube

Process: cold drawn

The tubes cover nominal (average) wall thickness.

Application: tubing for high temperature service

Dimensional range:

OD: 19.05-76.2mm

Any specific size is to be discussed before offer

The tube be 100% eddy current tested

Ultrasonic test is as option

Straightness ≤1mm/1000mm

Roughness: Ra ≤0.8

Test 1

• Each length of pipe shall be subjected the hydrostatic test.
• Unless otherwise specified in the purchase order, each length of pipe shall, at the option of the manufacturer, be subjected to the nondestructive electric test in lieu of the hydrostatic test.
• When specified by the purchaser, pipe shall be furnished without hydrostatic test and without nondestructive examination.
• When specified by the purchaser, pipe shall be furnished with both the hydrostatic test and a nondestructive examination having been performed.
• When selected by the manufacturer or when specified in the order, as an alternative to the hydrostatic test, or when specified in the purchase order in addition to the hydrostatic test, each pipe shall be examined by a nondestructive examination method in accordance with Practice E 213, Practice E 309 or Practice E 570. The range of pipe sizes that may be examined by each method shall be subject to the limitations in the scope of the respective practices.

Test 2

• For material heat treated in a batch-type furnace, tests shall be made on 5 % of the pipe from each treated lot. For small lots, at least 1 pipe shall be tested. For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5 % of the lot, but in no case less than 2 pipe.
• For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test. Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
• The bend test specimens shall be bent at room temperature through 180° without cracking on the outside of the bent portion. The inside diameter of the bend shall be 1 in. [25 mm].

E 213 Practice for Ultrasonic Examination of Metal Pipe and Tubing

E 309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

E 570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

Surface quality

All surfaces shall be clean and free of scale, dirt, grease, paint, or other foreign material that could interfere with interpretation of test results. The methods used for cleaning and preparing the surfaces for examination shall not be detrimental to the base metal or the surface finish.

Tubes shall be delivered with square cut ends. The ends are free of excessive burrs.

The tubes are bundled in the waterproof plastic sheet and packed in the wooden cases

The case is most suitable for hanging by forklift.

EN10204-3.1 MTC shall be issued

EN10204-3.2 MTC is as option

Zhangjiagang Bonded Area Yaxin Precision Tube Co., Ltd.

Zhangjiagang Bonded Area Henglong Steel Tube Co., Ltd.

Long-term adherence strict quality control, uphold the "scientific management to create first-class products, promote the comprehensive development of continuous improvement, quality service to win customer satisfaction," the quality and continuously forge ahead, creating enterprise independent quality brand; uphold the integrity of the first with partners closely aligned. We sincerely hope that the friendly cooperation with the community, work together!

Zhangjiagang bonded zone Yaxin precision pipe making Co., Ltd., Zhangjiagang bonded zone Yaxin Auto Parts Technology Co., Ltd.

Zhangjiagang Free Trade Zone Yaxin Precision Steel Pipe Co.,Ltd.and Zhangjiagang Free Trade Zone Yaxin Auto Parts Technology Co.,Ltd.is a Sino-foreign joint venture company,established in 1999,located at Taiwan Road,Free Trade Zone,Zshangjiagang City,jiangsu Province.It is borderend by international mertropolis city-Shanghai to the east,the beautiful ancient city Suzhou to the south ,jiangyin Changjiang River Bridge to the west ,and international port-Zhangjiagang port to the north.The company covers the area of 200000㎡，of which constructiong area is 8500㎡ ,is has 15 million U.S.dollars (about 96 millon RMB)of registered capital,260million RMB of fixed assets,and its annual output is 30,000 tons of precision seamiess steel pipe ,precision welded pipe 50,000 tons.The company currently employs 500 people ,of which more than 60 have higher education ,more than twenty have senior titles or above .Our main products are cold rolled and cold drawn precision seamless steel pipes ,of which more steel pipes for automobile,Precision welded pipe for automobile.
The company has eamed great reputation among many well-known large business customers by our modern hardware facilities,independent designed special mould and unique production process;and by our standardized managenmen and strict management procedures;and by our business philosophy of"Honesty ,cooperation andcommon development".Our products are widely used by Shanghai Huizhong Sachs Shock Absoorber Co.,Sacths Automotive Components Systems (shanghai)Co.,Ltd.,ZF Chassis Technology-rich Mining Austria (Changchun)Co.,Ltd.,dongfeng ZF Shock Absonrher Co.,Ltd,Shanghai Huizhong Automotive Manufactuing Co.,Ltd.,FAW Tokico Shock Absorber Ltd.,Zhuzhou Nanfang Yamaha Shock Absorter Co.,Tenneco(Beijing)Co.,Ltd.
The company passed the ISO9001 quality system certification in 2008 ,obtained Special equipment manufacturing license(TS2710J44-2013)in 2009,Passed PED certified of TUV NORD in 2011,passed ISO14001 and OHSAS18001 management system certification of DNV in 2012,and was rated as a high-tech enterprise in 2013.Under the fierce market competition ,the company closely centers around the quality policy of"creating first-class products by scientific management,promoting overall development by contstant improvement and satisfying to the custorners"tokeep forging ahead ,further perfecing all kinds of equipments to dvelop the high quality brand for the company.
The company sincerely hopes that we can get friendly cooperation with all circles of the community.

Zhangjiagang Bonded Area Henglong Steel Tubes Co., Ltd.

Zhangjiagang Bonded Area Henglong Steel Tubes Co., Ltd. is a Sino-foreign joint ventrue company,estabilshed in 1999,located at Taiwan Road,Free Trade Zone,Zhangjiagang City,Jiangsu Province.It is bordered by internationgal metropolis city-Shanghai to the east,the beautiful ancient city Suzhou to the south ,Jiangyin Changjiang River Bridge to the west ,and internationgal port-Zhangjiagang port to the north .It embraces convenient land and water transportation,hospitable weather,god-blessed land rich in culture and talented people .Thereby the company enjoys a great geographical advantage.The company covers the area of 200000㎡，of which construction area is 8500㎡.It has 15 million U.S.dollars (about 96 million RMB)of registered capital,260million RMBof fixed assets,and its annual output is 145,000 tons of seamlell steel pipes.
The Company specializes in producing various types of steel,such as10、20、20G、35、45、16Mn、ST52、40Cr、37Mn5、D9MnD、40Mn2、15CrMoG、12Cr1MoVG、08Cr2ALMo、12CrMo1、T11、T12、T22、T23、T5、T9、SA179、SA192、SA106B、SA210C.Main prouducts are different types of seamless steel pipes ,for example ,steel pipes for structure,fou transmission fluid,for low and medium pressure boiler,for petrleum cracking ,for high pressure fertilizer equipment ,high pressure boiler.The outer diameter of the pipe is from 6 to 133mm,wall thickness is from 0.5 to 16mm.Our products are widely used in industry of machinery manufacturing ,ship engineering ,petrochemical,and pressrue boiler.
The company has eamed great reputaion among many well-known large business customers by our modern hardware facilities,independent designed sepcial mould and unique production process;and by our standardized management and strict management procedures;and by our business philosophy of"Honesty,cooperation and common development".
The company passed the ISO9001 quality system certification in 2008,obtained Special Equipment Manufacturing License(ts2710j44-2013)in 2009,passed PED certified of TUVNORDin2011,passed ISO14001and OHSAS18001management system certification of DNV ,AND was rated as a high-tech enterprise in2012.Unedr the fierce market competition,the company closely centers around the quality policy of"creating first-class products by scientific management ,promoting overall development by constant improvement and satisfying the customers"to keep forging ahead,fruther perfecting all kinds of equipment to develop the high quality brand for the company.The company sincerely hopes that we can get the friendly cooperation with all circles of the community.