
3 Poles High Voltage Slip Ring with 30 amps Electrical Interface for Wind Turbine Use
Wind Turbine Slip Ring
Quick Detail
LPW-02 Wind Turbine Slip Ring This unit can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
Specifications
Specification | |
Poles | 3 |
Operating Speed | 0-300rpm |
Working Temperature | -35℃~ +50℃ |
Working Humidity | 60%RH or higher |
Electrical: | |
Voltage Rating | 1000VAC/DC or higher |
Current Rating | 30A per circuit |
Dielectric Strength | ≥500V@50Hz between each circuit |
Insulation Resistance | 1000MΩ@ 500VDC |
Electrical Noise | 1mΩ Min |
Mechanical: | |
Contact Material | Carbon Brush |
Lead Wire Size | High-TemperatureResistant Material |
Lead Wire Length | Standard 250mm(9.843inch) |
Protection | IP43 or higher |
Dimensions
Application Picture
JINPAT Electronics Co., Ltd
JINPAT Electronics, founded in 1996, is a national high-tech enterprise specializing in R&D, manufacturing and sales of high-precision slip rings. Typical products like Capsule Slip Ring, Through-bore Slip Ring, Large-current Slip Ring, Coax Rotary joint, Fiber Optic Slip Ring, Separate Slip Ring, Pin Slip Ring.
Besides, customization is supported to cater to the different application in that slip ring can be designed exclusively integrated with Ethernet, USB, HDMI, Sensor, CAN Bus, Thermocouple, RS232, RS422 and so forth.