Portable Water Cooled Condensing Units For Commercial Food Refrigeration

Portable Water Cooled Condensing Units for Commercial Food Refrigeration

Wide Range of Options

Adopted to multiple refrigerant R404a, R507, R407C, R22.

Stable & Reliable Performance

The units are equipped with world famous brand high quality compressor and components,

following the latest design, the perfect combination provides a safe and reliable system.

The unit comes standard with a controller that can effectively avoid turning on/off the motor

frequently as well as safety protection modules including the following: Phase loss protector,

Inverted sequence, overvoltage protector, undervoltage protector, oil pressure, high pressure,

low pressure, motor overload.

High efficiency oil separating system. When power is on, there is no need to add lubricating oil,

the standard provided oil heater (for screw unit), oil temperature controller (for screw unit) and

oil level switch (for screw unit), etc. can protect the function.

The PLC controller is a standard provided component. It can automatically decide the compressor

quantity to be used based on actual need of refrigerant capacity, average the running time

between each compressor, save the power. All of these will guarantee an over 30% longer

usage than single compressor condensing unit.

It has a unique low environment condensing pressure monitor system which guarantees a stable

functioning when there is a low ambient temperature, lack of oil feeding or oil flow warnin

High efficiency gas liquid separator is used, with a unique pipeline design, it can effectively

minimize the possibility of liquid strike.

The “Pressure Vessel Certificate” approved reservoir is provided as well as the safety relief valve.

Fault isolation device is served so that when a certain compressor breaks down, the rest of the

unit can keep running appropriately, making sure that client has enough time for repair and

replacement.

High efficiency & energy saving

Because of a huge demand difference between seasons for refrigerating capacity, the unit must

have a high level control for capacity, so that the unit can keep running under high efficiency

mode. The average parallel unit efficiency, according to different refrigeration system is 30%

higher than single compressor unit.

Using multiple compressor parallel units can provide a multiple energy level control, the

refrigeration output can be dynamically allocated more smoothly according to actual situation.

With high efficiency oil separator, only a small amount of lubricating oil enters the system,

this largely brings up the heat exchanging efficiency.

The PLC controller monitors running compressors quantity, it maintains a maximum use rate

even when only parts of the compressors are functioning.

PLC controller can be set with the best running curve (maximum & minimum power comsuption),

to same as much electricity as possible.

With “modularized design” the risk during construction can be largely reduced, construction

period can be shortened, improve the product quality controllability.

Compact & Nimble Structure

Components such as compressor, reservoir, gas-liquid separator, oil separator, economizer,

intake manifold, fluid supply manifold, electrical control equipment are all centralized, making

sure every inch of the space is fully used.

The unit has a compact structure, the space saved during assembly can provide more space for

commercial use, benefiting the end user with extra profit.

Easy operation & convenience

With PLC safety auto control, client can program with touch screen, the graphical control

interface can intently show the running status, recording data, parameter settings and false

alarming, easy for operation.

The reserved remote communication interface can help customer to monitor remotely.

Thanks to the print output interface, customer can print the running history data of the unit and

the system.

Air cooled piston type condensing unit

General Features

Green refrigerant R404a is used.

High efficiency and low noise external rotor fan motor is used.

Box type integrated design, internal built high efficiency coper tube aluminum fin conderser.

PTC sensor is used to monitor motor temperature.

Polyester oil pre-filled.

Single stage condensing unit has been extended from 27 KW to 800 KW (variety of options)

Double stage condensing unit has been extended from 21 KW to 174 KW (variety of options)

Standard condensing unit configuration
Semi hermetic screw type compressor, box type air cooled condenser, secondary oil separator, exhaust

temperature protection device, reservoir (certificated), low temperature area gas-liquid separator,

dashboard, filter, sight glass, frozen oil, oil differential controller, intercooler and air/oil cooled condenser

for low temperature units, air-cooled oil cooler, etc.

Optional configuration

• R134a, R507, R22, etc
• Extra large reservoir,.
• Condenser fan speed controller

Code description

Shandong Ourfuture Energy Technology Co., Ltd produces screw type  condensing units, screw type multiple compressor parallel units, reciprocating condensing units, reciprocating parallel compressor racks, scroll type compressor box type condensing unit and scroll type parallel compressor units with best quality and favorable price.

Our compressor units/racks can be used in cold room storage, blast freezer, fast frozen tunnel, retail refrigeration, cold chain logistics, chemical and pharmarcy area, fishery and shipping industry, etc. 

Our basic products include the following:
1. Single-stage reciprocating type parallel compressor racks(20HP~350HP) @7.5~45oC Tss.
2. 2-stage compressor reciprocating type parallel units(16~180HP) @-25~-65oC Tss.
3. Single-stage screw type parallel compressor racks(80~600HP) @5~45oC Tss.
4. 2-stage compressor screw type parallel compressor units(100~600HP) @-30~-65oC Tss.
5. Danfoss scroll type compressor box type condensing units and parallel compressor racks.
6. R744(CO2) cascade system compressor units.
(Refrigerant can be R744(CO2), R404a, R507, R407C, R22, etc. )

Our compressor racks and condensing units are equipped with world famous brand high quality components, we are distributor of , Carlyle, Fusheng, Bock, OEM factory of Danfoss. Key controllers and valves are Danfoss brand, contactors are Siemens brand. 

We also develop and program our own PLC control system, it can automatically control the running compressor quantity according to refrigeration need so that the system can save more energy and can provide 30% more use life than single compressor condensing units. With PLC auto control graphical interface, customer can operate with read the running status, data, parameter and error alarms easily. Optional remote control communication port is also provided, so that customer can monitor in their office. 

We focus on high efficiency daily mangement and QC to guarantee stable quality. By following ISO9001:2008, we have strict tracking system of each order, all welding are proformed with argon charged in the system to prevent welding waste going into the system. All condensers are delivered with high pressure gas charged when they delivered. Each final compressor rack will go through no-load test before packaging.

We welcome friends from all over the world, together let's serve the world with more environmental, efficient and cost effective refrigeration unit. 

Ourfuture Refrigeration - "Our future - refrigeration future!"